We have the knowledge to develop customised postprocessors for our customers. Would you like us to help you with this?
Wij hebben de kennis en ervaring in huis om postprocessoren op maat te ontwikkelen voor onze klanten. Tijd om uw CNC machine optimaal te laten draaien?
A Post-Processor is a unique "driver" that is specific to a CNC machine, robot or mechanism; some machines start in different places or require additional motion between each operation, the Post-Processor works with the CAM software or off-line programming software to ensure that the G-Code output or program is correct for a specific Trademark machine Controller (Fanuc, Siemens-Sinumeric, Mazak-Mazatrol, Heidenhein, Deckel-Maho, etc. ).
CAM software uses geometry from a CAD model and converts it to G-code. The CAM software analyses the CAD model and determines which tools and milling paths will be used to mill the desired shapes. This requires a CAM post-processor that generates the exact G-code dialect used by the machine control module (Sinumeric, Fanuc, Mazatrol, Heidenhein, Toshiba etc.) being controlled. An instance of such a translation is often called a "post".
Een postprocessor zorgt voor de vertaling van uw CAM programma (toolpaths & bijhorende instellingen) naar G-codes die de sturing van uw CNC-machine of robot kan inlezen en begrijpen.
No, we develop postprocessors exclusively for the best CAM software on the market, Siemens NX.
Definitely! We can develop postprocessors for any type of control available on the market.
The installation of Siemens NX already includes numerous so-called out-of-the-box postprocessors for various controls. In addition, customers with an active maintenance contract have access to the online PostHub from Siemens.
However, customers often have specific requirements for the output of their NC code. Or they have a complex set-up of the CNC machine. This is where we come in with a tailor-made solution that ensures the most efficient NC code for your machine.
Each customised post processor is also a customised offer. So contact us to discuss your project and we will send you a tailor-made offer as soon as possible.
Yes. There are two sources for free post-processors. Firstly, you have a bunch of PPs that are included in the standard installation of NX for various controls and including an NC machine simulation model. An overview of the installed machines can be found here (LINK TO PDF possible?).
On the other hand, customers with an active maintenance contract or Subscription subscription also have access to the PostHub of Siemens. Here you can find hundreds of standard post processors, both free and for a fee. Go to the Posthub and log in with your Siemens WebKey account.
Yes, this can also be done with our Siemens NX software.
Neem dan contact op met ons of doe een aanvraag via onze quick quotation. Zo kunnen we samen met u op zoek gaan naar een oplossing of implementatie van uw engineering & manufacturing vraagstukken.
Update your browser to view this website correctly. Update my browser now